Now Playing: a Narrative
Topic: Pipe 11: DEC06 -NFS
- I corrected the problem of disproportion by reducing the height of the bowl.
When working on where the shank meets the stem, I accidentally broke the tenon off the shank. I suppose now might be a good time to explain how to get the broken piece of tenon out off the mortis, especially if you do not have the special tool for the purpose. Find a sm. brad with a head diameter smaller than the draught hole. Hold the brad with a pair of pliers. Insert the head into the hole past the end of the broken tenon. Hook the end of the tenon with the edge of the head and pull the piece out. Backto the drawing board on the stem. . . Not as bad as it seems, but not tonight I have a headache...
Posted by thos.martin
at 7:07 PM EST
Updated: Monday, 11 December 2006 6:33 PM EST